cantilevered structure中文是什么意思

• 悬臂结构

• cantilever    n. 1.(桥梁的)悬臂，肱梁；支架。 2.电缆吊线夹板 ...
• structure    n. 1.构造，结构；组织；石理，石纹。 2.建造物。 ...
• cantilevered    悬臂式的
• cantilevered balcony    挑阳台
• cantilevered bending    悬臂弯曲
• cantilevered design    悬臂式设计
• cantilevered end    悬臂端
• cantilevered footpath    悬臂式行人径
• cantilevered gantry    悬臂起重机台架
• cantilevered hangar    张臂式结构机库
• cantilevered landing    悬臂楼梯平台
• cantilevered nacelle    悬臂短舱
• cantilevered roll    悬臂辊
• cantilevered steps    半悬梯级
• cantilevered wall    悬臂墙
• cantilevered assembling construction    悬臂拼装法
• cantilevered corner beam    角梁
• cantilevered foot path    悬臂式人行道
• cantilevered mylohyoid ridge    拱形下颌舌骨嵴
• cantilevered pitot cylinder    悬臂式圆柱形全静压管
• cantilevered slab canopy    悬臂式平板檐篷
• cantilevered well module    悬臂式井模
• roomy cantilevered seat    宽敞悬臂式座椅
• root cantilevered strut    悬臂支柱
• structure    n. 1.构造，结构；组织；石理，石纹。 2.建造物。 3.【化学】化学结构。 4.【心理学】(直接经验中显现的)结构性，整体性；整体结构。 military structures 工事。 adj. -d ,-less adj.

• A mechanical behaviors analysis of large - cantilever structure foundation in light rail station under loading
  轻轨车站大悬臂结构基础在荷载作用下受力性能分析
• Numerical analysis of control of hard roofs stepped cantilever structure for longwall mining with sublevel caving
  坚硬顶板综放采场台阶式悬梁结构控制及其数值分析
• Design of the biggest cantilever structure garage in our country and trial research of the vertical earthquake force
  我国最大的悬臂结构机库设计与竖向地震力的试验研究
• Accordingly some available conclusions are obtained in the aspect of analysis and design of the large span and large cantilever structures
  同时本文也在分析与设计大跨度、大悬臂等复杂结构方面得出了有指导价值的成果。
• Compared with the traditional cantilever structure , the bearing life of two - terminal bracing structure is improved by 17 . 51 times , while the contact stress of gear tooth is reduced by 45 . 7 % , and the bending stress of gear tooth is reduced by 62 . 8 %
  与传统主动齿轮悬臂结构相比两端支撑结构的轴承寿命提高了17 . 51倍、轮齿接触应力降低45 . 7 % 、轮齿齿根弯曲应力减小62 . 8 % 。
• Usually series mode is used in low frequency circuit while bypass mode is used in high frequency circuit , series mode micro - switch with cantilever structure is similar to an fet , when voltage is applied on gate , and the fet will be turned on between source and drain
  有静电电压作用在梁和底面电极时，梁发生偏转，在源极和漏极之间实现导通，常用于自控和通信系统的信号通路空气桥旁路开关主要用于微波段信号的通路。
• This thesis gives an analysis of a kind of micro - switch with cantilever structure ; analyzes and calculates the defection of cantilever in detail ; presents the fabrication process of micro - switch with cantilever beam ; the performance of this thesis is as following : chapter one : outlined the mems technology and micro - switch . analyzed different structures of micro - switch and presented the main task of this thesis . chapter two : analyzed deformation and calculated the deflection , internal forces , and touch force of uniform cantilever beam and non - uniform cantilever
  本文对悬臂梁式的微开关结构进行了设计、分析和讨论，计算了悬臂梁在电场力作用下的变形和受力特性，给出了一种悬臂梁式机构微开关的微机械工艺，并对驱动微开关的高压升压电路进行了分析和设计。
• Firstly mathematic model of the micro cantilever structure is established by elastic mechanics analysis , during which small - displacement and large - displacement are both discussed . also the direct current exiting voltage and alternating current exciting voltage are both discussed . then we investigate the bifurcations of the conditions which have been mentioned above
  首先基于弹性力学的方法建立了微悬臂梁的动力学模型,包括微悬臂梁为精确挠度和近似挠度两种系统,以及作用电压为直流和交流的情况,并对各种情况进行了静态分叉的分析。